TANNING JAB KIT

• Flip off the cap from the Melanotan 2 Tanning Injection vial. (note that all vials are unlabelled)
• Wipe the surface of the top of the vial with the enclosed alcohol wipe.
• Wipe the surface of the injectable water tube with the enclosed alcohol wipe and discard the wipe.
• Remove the enclosed syringe from the packaging.
  snap the ampoule water with a piece tissue be careful not to spill the water tilt ampule on side and slowly draw water out the ampoule
• Instert the needle of the syringe into the water &  pull back the plunger of the syringe so you withdraw 1ml of water (1 full syringe) and slowly pull the syringe out.
• Insert the syringe into the centre of the Melanotan 2 Tanning Injection vial top and aiming the needle of the syringe at the side of the vial depress the plunger so you completely empty the syringe of the water and slowly remove the syringe from the vial (you may wish to add more water, some people say adding another quarter of a syringe cuts down on initial side effects).
• Roll gently between your finger to help the solution to dissolve  do not shake the solution.
• Place the Melanotan 2 solution in the fridge for storage until ready for use.
• Make sure you always put the syringe caps on and carefully dispose of it.

You have now mixed your Melanotan 2 Tanning Injection solution. Please store the mixed solution in the fridge, once mixed the solution can be stored refrigerated for up to six months. Unmixed the product can be stored in a cool dry place for up to twelve months.

Administering the Melanotan 2                     IMPORTANT: NEVER SHARE SYRINGES

• Holding the Melanotan 2 Tanning Injection vial upright, insert the syringe in the middle of the grey cap.
• Pull the plunger until you have 0.1ml (10th of a syringe) of Melanotan 2 in the syringe and slowly remove it.
• Find a fleshy area of your skin – 4cm to the side of your belly button is the most common.  Wipe the area with one of the alcohol wipes included.
• Pinch 2cm either side of the area to be injected.
• Holding the syringe like a pen, and at 90 degrees to your skin, swiftly insert the syringe into your skin.
• Fully depress the plunger so all the Melanotan 2 has emptied from the syringe and slowly withdraw.
• Hold the alcohol wipe on the injected area for a minute.
• Once you’ve taken a few doses you may need to tilt the vial at an angle for the needle to be in the solution

You have now administered your first dose of Melanotan 2. Tanning Injecti

You are now the envy of all your friends !!

to Use Melanotan 2 Tanning Injections

Ready to start your tanning journey? Great! Just make sure your mixed MT2 solution, syringe, and alcohol swabs are ready. You’re just six simple steps away from your first shot:

1. Grab your mixed MT2 vial. Push the syringe needle through the center of the grey cap—just like when adding water.
2. Gently pull back the plunger and draw 0.1ml of solution l00 units on needle 
3. Clean the injection area on your belly—just a few centimeters from your belly button.
4. Pinch 1–2 cm of tummy skin (about four fingers from your navel). This helps you avoid going too deep.
5. Insert the needle into that pinched area at a 90-degree angle. If you’re slim, go in at 45 degreesMake sure it stays in the fatty layer (not deeper).
6. Slowly press the plunger to deliver the full 0.1ml. Once done, gently remove the needle.

And that’s it—you’ve taken your first MT2 jab!

Tip: If you’re sensitive, try micro dosing 0.05ml for the first 3–4 days, or double the water during mixing to ease side effects.

we do not offer discount or refund and returns on any of our products

results vary from person to person